In this tutorial, I will be showing you how to design a retro album cover straight out of the 70’s! To create our album cover we will be using The Beardy typeface from Aiyari which is just one of several beautiful fonts that you will find in The Amazing Designer’s Creative Collection. Along with these great fonts, you will also find various brushes, textures, lettering kits and watercolour collections from some of the top creators in the industry today. If you’re all ready for a blast from the past then fire up Photoshop and let’s get started!

HAVE YOU SEEN OUR YOUTUBE CHANNEL?

Watch the video tutorial below and subscribe to our YouTube channel for regular updates direct to your inbox.

Here’s a look at what we’ll be creating:

Love And Funk Album Cover Design

Step 1: Love And Funk Album Cover

Begin by opening Adobe Photoshop and create a New Document that is ‘7.5’ inches wide by ‘7.5’ inches tall with an RGB Color Mode and a Resolution of 300 ppi. Let’s also take a moment to name our file – here I will name my file ‘love-and-funk-album-cover-design’ but feel free to call it anything you would like. Once you have set that up, go ahead and click on the ‘Create’ button at the bottom right of the dialog box to make your document.

Love And Funk Album Cover Design

You will now have a single ‘Background’ layer with a small lock icon next to it in the Layers Palette. Let’s go ahead and click on the Adjustment Layer icon from the bottom of the Layers Palette and then choose ‘Solid Color’ from the menu that appears.

Love And Funk Album Cover Design

For the fill color, enter the hex value ‘#060D10’ and then press ‘Return’ on the keyboard or click ‘OK’ to proceed.

Love And Funk Album Cover Design

After adding the Adjustment Layer let’s go ahead and drag the original ‘Background’ layer to the trash since we no longer need it.

Love And Funk Album Cover Design

Step 2: Lead Singer

Next, go to the File menu and choose ‘Place Embedded…’ from the drop-down that appears.

Love And Funk Album Cover Design

Navigate to the folder or location where you’ve downloaded the image of the lead singer which you can download here from Unsplash. Once you’ve located the image, choose ‘Place’ from the lower right corner to bring it into your document.

Love And Funk Album Cover Design

After importing the image, scale it up by dragging outwards from any of the four corners while holding the Alt/Option+Shift keys and then position it on the left side of the canvas as shown here:

Love And Funk Album Cover Design

Step 3: Adjustment Layers

After sizing and positioning the image of the singer, select the Adjustment Layer icon from the bottom of the Layers Palette and then choose ‘Black & White…’ from the menu.

Love And Funk Album Cover Design

Return to the Adjustment Layer icon again and this time choose ‘Gradient Map…’ from the list to add it to the top of your Layers Palette.

Love And Funk Album Cover Design

In the Properties section we will now click on the gradient strip to modify the colours.

Love And Funk Album Cover Design

Step 4: Modifying The Gradient Map

Once the Gradient Editor appears, click on the lower left square and then on the ‘Color’ swatch to change the first colour. You should now see the ‘Color Picker’ where we can enter the hex value ‘#141D35’ and then press ‘OK’.

Love And Funk Album Cover Design

Now click on the small square at the bottom right of the Gradient Editor and then click on the ‘Color’ swatch again. This time, enter the hex value ’00FFD8′ and then press ‘OK’ or hit ‘Return’ on the keyboard twice to apply the changes and close out of the Gradient Editor.

Love And Funk Album Cover Design

Return to the Adjustment Layer icon and add another ‘Black & White…’ adjustment to the top of the stack.

Love And Funk Album Cover Design

Step 5: Singer Group

Select the top layer in your Layers Palette, hold the Shift key, and then select the very bottom ‘Color Fill 1’ Adjustment Layer to select all of the layers together.

Love And Funk Album Cover Design

With all of your layers still selected, press Command/Ctrl+G to place them into a folder and then double click on the ‘Group 1’ text and rename the folder ‘MAIN IMAGE’ as shown in the image below:

Love And Funk Album Cover Design

Step 6: Gritty Textures

Next we will need to download some free textures. Grab the first pack from GraphicsFuel here and then the second texture pack from Graphic Burger here so we have some nice dust and scratch textures to work with. After downloading both packs, go to the File menu and choose ‘Place Embedded…’ as shown below:

Love And Funk Album Cover Design

Navigate to the GraphicsFuel texture pack and select the first texture – ‘overlay-texture1.jpg’ and then choose ‘Place’ from the bottom right-hand corner to import the texture into your document.

Love And Funk Album Cover Design

Hold the Alt/Option+Shift keys and scale the texture up from the center until it fills the entire canvas and then press ‘Return’ to apply the transformation.

Love And Funk Album Cover Design

Change the Blend Mode of the texture from ‘Normal’ to ‘Screen’ and then press ‘5’ on the keyboard to lower the opacity to ‘50%’.

Love And Funk Album Cover Design

Step 7: Texture Adjustment

With the texture layer selected, hold the Alt/Option key and click on the Adjustment Layer icon at the bottom of the Layers Palette. From here, choose ‘Levels…’ from the list.

Love And Funk Album Cover Design

When prompted with the ‘New Layer’ dialog box, check off the ‘Use Previous Layer to Create Clipping Mask’ option and then press ‘OK’ to continue.

Love And Funk Album Cover Design

In the Properties panel, move the left slider in towards the center until it’s set to ’36’ to add some contrast to the texture. The Levels Adjustment Layer should also have a Clipping Mask applied to it that will ensure the adjustment only affects the layer directly below it, which is what we want!

Love And Funk Album Cover Design

Step 8: More Scratch

Return to the File menu and choose ‘Place Embedded…’ once again.

Love And Funk Album Cover Design

This time let’s navigate to the Graphic Burger textures and select ’02.png’ before choosing ‘Place’ from the lower right corner.

Love And Funk Album Cover Design

Once the texture is brought into your document, scale it up by dragging outwards from any four corners of the bounding box while holding the Alt/Option+Shift keys until the texture fills the canvas, and then press ‘Return’ to apply the transformation. After that, change the Blend Mode of the layer to ‘Screen’ to allow the image to show through.

Love And Funk Album Cover Design

Step 9: Curves Adjustment

With the top texture Smart Object layer selected, hold the Alt/Option key and click on the Adjustment Layer icon at the bottom of the Layers Palette before choosing ‘Curves…’ from the drop-down menu.

Love And Funk Album Cover Design

When prompted with the next panel, check off the ‘Use Previous Layer to Create Clipping Mask’ option once again.

Love And Funk Album Cover Design

In the Properties panel, click to make a point in the center of the grid and then move it over to the far right and down so that the ‘Input’ is set to ‘217’ and the ‘Output’ is set to ’79’.

Love And Funk Album Cover Design

Step 10: Texture Folder

Select the top Curves Adjustment Layer, hold the Shift key, and then select the ‘overlay-texture1’ layer so both textures and Adjustment Layers are selected at the same time.

Love And Funk Album Cover Design

Press Command/Ctrl+G to place the textures into a new folder and then double-click the folder name in the Layers Palette and change it to ‘TEXTURES’. After that, press the number ‘4’ on the keyboard to reduce the opacity of the folder to ‘40%’ as shown here:

Love And Funk Album Cover Design

Step 11: Color Wash

Make sure that the ‘TEXTURES’ folder is selected and then click on the Adjustment Layer icon at the bottom of the Layers Palette and choose ‘Solid Color…’ from the list.

Love And Funk Album Cover Design

For the fill colour enter the hex value ‘#4094AF’ and then press ‘Return’ or click ‘OK’ to proceed.

Love And Funk Album Cover Design

After adding the solid colour to the top of the Layers Palette, change the Blend Mode from ‘Normal’ to ‘Multiply’ and then reduce the opacity of the Adjustment Layer to ‘60%’ by pressing the number ‘6’ on the keyboard.

Love And Funk Album Cover Design

Step 12: Smoke

Next, download this second free stock image from Unsplash and save it with your other files. Once you have done that, come back to Photoshop and go to the File menu before choosing ‘Place Embedded…’ from the menu once again.

Love And Funk Album Cover Design

Navigate to the image of the singer with the smoky background and then choose ‘Place’ to import it as a Smart Object.

Love And Funk Album Cover Design

After importing the image, scale it up by dragging outwards while holding Alt/Option+Shift and crop an interesting area of just the smoke before pressing ‘Return’ to apply the transformation once you are happy with the crop.

Love And Funk Album Cover Design

Once you are happy with the size and position of the smoke, change the Blend Mode of the layer from ‘Normal’ to ‘Color Dodge’ as shown below:

Love And Funk Album Cover Design

Step 13: Smoke Adjustment

With the smoke layer selected, hold the Alt/Option key and click on the Adjustment Layer icon at the bottom of the Layers Palette before choosing ‘Levels…’ from the list.

Love And Funk Album Cover Design

When the pop up menu appears, check off the ‘Use Previous Layer to Create Clipping Mask’ option and then click ‘OK’ or press ‘Return’ on the keyboard to continue.

Love And Funk Album Cover Design

In the Properties panel, move the left slider in towards the center until it’s set to ’34’ as shown here:

Love And Funk Album Cover Design

Step 14: Smoke Group

Select the top Levels Adjustment Layer, and then hold the Shift key and select the Smart Object layer below so both layers are selected together.

Love And Funk Album Cover Design

Press Command/Ctrl+G to place the layers into a new folder and then double-click the ‘Group 1’ text to rename the folder ‘SMOKE’.

Love And Funk Album Cover Design

Step 15: Custom Gradient Map

Make sure that the top ‘SMOKE’ folder is selected and then click on the Adjustment Layer icon at the bottom of the Layers Palette and choose ‘Gradient Map…’ from the list.

Love And Funk Album Cover Design

In the Properties panel, click on the colour strip to bring up the panel where we can modify the colours.

Love And Funk Album Cover Design

Click on the far left of the strip in the Gradient Editor and add a bright yellow colour such as ‘#F9D615’ to the colours.

Love And Funk Album Cover Design

Click along the bottom of the colour strip in the Gradient Editor to add a second colour with a ‘Location’ of ‘34%’ and then enter the hex value ‘#FD7C00’ to add a nice vibrant orange to the gradient.

Love And Funk Album Cover Design

Add a third colour with a ‘Location’ of ‘67%’ and use the hex value ‘#6F156C’ and then click ‘OK’ once again to add this colour to the gradient.

Love And Funk Album Cover Design

Click along the bottom of the Gradient Editor and add a fourth colour to the far right. This time, enter the hex value ‘#081B40’ to finish off the gradient with a dark, rich blue colour and then press ‘OK’ to apply the changes and close out of both panels.

Love And Funk Album Cover Design

Now that we’ve added our four colours to the Gradient Map Adjustment Layer, return to the Properties panel and check off the box that says ‘Reverse’ to invert the order of the colours as shown below:

Love And Funk Album Cover Design

Step 16: Hue Adjustment

Click the Adjustment Layer icon again and choose ‘Hue/Saturation…’ from the list.

Love And Funk Album Cover Design

In the Properties panel let’s increase the ‘Hue’ slider to ‘121’ to change the colours.

Love And Funk Album Cover Design

Step 17: Fill Adjustment

Click the Adjustment Layer icon again and this time choose the ‘Solid Color…’ option.

Love And Funk Album Cover Design

Enter the hex value ‘6D4915’ and then press ‘OK’ to continue.

Love And Funk Album Cover Design

After applying the solid colour, change the Blend Mode of the layer from ‘Normal’ to ‘Color’ and then reduce the opacity of the layer to ‘60%’ by pressing the number ‘6’ on the keyboard.

Love And Funk Album Cover Design

Step 18: Adding Contrast

Make sure that the top Adjustment Layer is selected in your Layers Palette and then click on the Adjustment Layer icon at the bottom. From the list that appears we now want to choose ‘Levels…’ to add it to the top of all of our layers.

Love And Funk Album Cover Design

In the Properties panel, move the left slider in towards the center until it’s set to ’22’ as shown here:

Love And Funk Album Cover Design

Step 19: Adjustment Layers Group

The four Adjustment Layers that we’ve added in the last few steps will affect the entire image as none of them should have any Clipping Masks on them. Select the very top Levels Adjustment Layer, then hold the Shift key and select the Gradient Map Adjustment Layer so all four of the Adjustment Layers are selected together like this:

Love And Funk Album Cover Design

With your four Adjustment Layers still selected, press Command/Ctrl+G to put them into a new folder and double-click the ‘Group 1’ text and rename the folder ‘ADJUSTMENT LAYERS’ as shown in the image below:

Love And Funk Album Cover Design

Step 20: Love And Funk

Create a new layer and then switch to your Type Tool (T) and type out the word ‘Love’ in upper and lowercase. Open up the Character Panel from the Window menu and we can now adjust a few settings. Here I am using ‘The Beardy Pro’ typeface in the ‘Display’ style, but if you don’t have access to this font you can use Funkies Font which is free typeface from DaFont.com. Once you’ve selected your font, let’s use the Character Panel to make the size of the text ‘223.5’ and then set the ‘Tracking’ to ’40’ as shown below:

Love And Funk Album Cover Design

Open the ‘Glyphs’ panel from the Window menu and then use the Type Tool (T) to highlight the uppercase ‘L’ and then you can choose one of the alternates from the Glyphs panel. Here I will be selecting the middle alternate as it has a nice swirl on the bottom.

Love And Funk Album Cover Design

Highlight the lowercase ‘o’ and choose the alternate for that character next.

Love And Funk Album Cover Design

Highlight all of the text and then click on the ‘Color’ swatch and change the fill colour to ‘#F9D615’.

Love And Funk Album Cover Design

Let’s also manually adjust the kerning a bit by moving our cursor in between two characters and then pressing Alt/Option and the left arrow to remove some of the space between each of the letters until it looks nice and even.

Love And Funk Album Cover Design

Step 21: Second Line

Add another new layer and type out the word ‘AND’ using the same typeface with the regular characters – no alternates necessary. Let’s adjust the size to be about ’69 pt’ and then use a ‘Tracking’ setting of ’20’ and the same golden yellow fill colour. Here we want to place the text just below the ‘V’ in ‘Love’ as shown below:

Love And Funk Album Cover Design

Step 22: Funky Town

Add a third text layer and type out the word ‘Funk’ with the same settings we used for ‘Love’. Let’s use the Glyphs to once again choose a few alternates for the ‘F’ as shown here:

Love And Funk Album Cover Design

Moving on let’s select an alternate for the ‘n’ as shown here:

Love And Funk Album Cover Design

Lastly, let’s select an alternate for the ‘k’ at the end of ‘Funk’ as shown here:

Love And Funk Album Cover Design

Step 23: Smart Text

Once you’ve created your three lines of text, select the top layer, hold the Shift key, and then select the third layer so all three layers are selected together. After that, hold the Control key and click on any of the three layers to reveal a menu where we want to choose ‘Convert to Smart Object’ as shown in the image below:

Love And Funk Album Cover Design

Rename the Smart Object layer ‘TT’.

Love And Funk Album Cover Design

Next, select the ‘TT’ Smart Object layer, press Command/Ctrl+J to duplicate it, and then press Command/Ctrl and the left bracket key to move this layer below the original ‘TT’ layer.

Love And Funk Album Cover Design

Step 24: Taking Action

Go to the Window menu and choose ‘Actions’ from the dropdown menu.

Love And Funk Album Cover Design

After opening the Actions window, click on the ‘New Action’ icon from the lower right of the panel. Once you’ve done that you will be asked to name your action so let’s just call it ‘EXTRUDE’. After you’ve given the action a name, hit the ‘Record’ button.

Love And Funk Album Cover Design

Now that we’ve started recording we can create our very basic Photoshop action. This isn’t recording in real time so there’s no need to rush! Let’ start by selecting the ‘TT copy’ layer and then pressing Command/Ctrl+J to duplicate it. After that, press Command/Ctrl and the left bracket to move this new copy below the previous copy. After that, press the down arrow once, and then the right arrow once. After you’ve done that, click on the stop button to stop recording. You have now made your own reusable Photoshop action!

Love And Funk Album Cover Design

What we’re going to do from here is select the ‘TT copy 2’ layer and then simply press the play button in the Action panel about 20-25 times. Doing this will repeat the action and create an extrusion effect that will give our text a seamless long shadow. Once you have created all of your copies, select the top copy just below the main ‘TT’ Smart Object layer, hold the Shift key, and then select the bottom copy so they are all selected together.

Love And Funk Album Cover Design

With all of the Smart Object layers selected (except for the main TT layer) press Command/Ctrl+G to put them into a new folder and then double click the ‘Group 1’ text to rename the folder ‘EXTRUSION’ as shown below:

Love And Funk Album Cover Design

Step 25: Extrusion Colors

Next, double click on the ‘EXTRUSION’ folder to open the Layer Style window and check off the ‘Color Overlay’ option.

Love And Funk Album Cover Design

Enter the hex value ‘#D9581F’ and then press ‘OK’ to continue.

Love And Funk Album Cover Design

Next, check off the ‘Stroke’ option and add a ‘6 px’ stroke set to a ‘Position’ of ‘Outside’ using the same fill colour as the Color Overlay – ‘#D9581F’. Once you’ve added that, click ‘OK’ to close out and apply the changes.

Love And Funk Album Cover Design

Step 26: Extra Outline

Select the main ‘TT’ Smart Object layer and duplicate it by pressing Command/Ctrl+J on the keyboard. Turn the ‘Fill’ of this layer to ‘0%’ and then rename the layer ‘INLINE’ as shown below:

Love And Funk Album Cover Design

Double click on the ‘INLINE’ Smart Object to open the Layer Style window and then check off the ‘Stroke’ option once again. This time let’s make the ‘Size’ about ’10 px’ and then change the ‘Position’ to ‘Inside’. From here, click on the ‘Color’ box to change the fill.

Love And Funk Album Cover Design

For the fill color, enter the hex value ‘#FD9400’ and then press ‘OK’ twice to apply the changes and close out of both dialog boxes.

Love And Funk Album Cover Design

Next, select the top ‘INLINE’ layer and then hold the Shift key and select the ‘EXTRUSION’ group folder so all of the text layers are selected together.

Love And Funk Album Cover Design

With the layers still selected, press Command/Ctrl+G to put them into a new folder and rename it ‘TT’ for ‘Title Treatment’ as shown here:

Love And Funk Album Cover Design

Step 27: Adding Depth

Select the newly created ‘TT’ folder and then press ‘5’ to reduce the opacity to ‘50%’ before clicking on the ‘Add Layer Mask’ icon from the bottom of the Layers Palette.

Love And Funk Album Cover Design

Press ‘B’ on the keyboard to switch over to your Brush Tool and then make sure you have a solid black foreground color selected with a hard round brush at 100% opacity as shown here:

Love And Funk Album Cover Design

With the opacity lowered we should be able to see the areas we want to brush over to allow the singers face and hand to come in front. Brush over these areas carefully with your brush using the Layer Mask and then once you have finished, bring the opacity of the folder back to to ‘100%’. You should now have something like this:

Love And Funk Album Cover Design

Step 28: Additional Text

Add a new layer and use the Type Tool (T) once again to type out the name ‘THOMAS’ in all caps. Here I am using the same typeface from earlier with the golden yellow fill color. Use the Character panel to change the size of the text to ’40’ as shown here:

Love And Funk Album Cover Design

Press Command/Ctrl+J to duplicate the layer and then move it down below the previous text layer. Use the Type Tool (T) to click inside and change the text to read ‘MAYFIELD’ in all caps once again using the same settings as before.

Love And Funk Album Cover Design

Add a third line of text above the name and type out the words ‘Presented by’ in upper and lower case. Here let’s click on the ‘Color’ swatch and then use the eyedropper to sample some of the orange color from the ‘EXTRUSION’ in our main title.

Love And Funk Album Cover Design

Step 29: Adding The Border

Press ‘U’ on the keyboard and then check along the top toolbar to make sure that we have ‘None’ for the ‘Fill’ color and then add a ‘Stroke’ of ‘4 px’. From here, click on the outline box and then click on the rainbow colored icon in the upper right of the color panel.

Love And Funk Album Cover Design

For the stroke color, let’s enter a hex value of ‘#D9581F’ and then click ‘OK’ to proceed.

Love And Funk Album Cover Design

Click and drag from the top left corner to the lower right corner while holding the Shift key to create an orange border around the whole image as shown here:

Love And Funk Album Cover Design

Step 30: Global Adjustments

With the top ‘BORDER’ layer selected, click on the Adjustment Layer icon and then choose ‘Curves…’ to add a new Adjustment Layer above all of the other layers.

Love And Funk Album Cover Design

In the Properties panel, click in the center of the grid to add a point and then drag it slightly down and to the right so that the ‘Input’ is set to ‘140’ and the ‘Output’ is set to ‘115’ to add some more contrast overall.

Love And Funk Album Cover Design

Step 31: Final Group

Select the very top Curves Adjustment Layer and then hold the Shift key and select the ‘MAIN IMAGE’ folder at the very bottom of the Layers Palette to select all of your layers and folders together.

Love And Funk Album Cover Design

With everything still selected, press Command/Ctrl+G to put everything into one main folder and double click the folder name to change it to ‘ARTWORK’.

Love And Funk Album Cover Design

We have now completed our ‘Love And Funk’ album cover design! To create our design we’ve used a beautiful retro font and combined it with our own Photoshop Action along with various textures and stock imagery. I hope that you have enjoyed this tutorial and hopefully learned some new techniques along the way. With so many great elements to choose from, this bundle is sure to help you step up your designs and take your work to the next level. I can’t wait to see what you guys do with it!

Love And Funk Album Cover Design

Remember that whether it’s your outcome for this tutorial or something new you’ve made, we’d love to see your designs on our Facebook page.

Please leave a comment if you have any questions or suggestions. I always look forward to hearing from you!

There’s still time to check out The Amazing Designer’s Creative Collection with a huge variety of assets and carefully crafted high quality items all for an unbeatable price of $29!